Start a conversation

General

  • Yealink Templates for 3CX and Edgewaters Edgemarc SBC Device

    Overview: In this article, we will provide you with a basic template (attached at the bottom of this guide) to help autoprovision your Yealink devices to be used with Edgewaters Edgemarc SBC and your ...

  • Utilizing an Edgewater SBC with your CloudCo Server

    Overview: An Edgewater Edgemarc SBC can be deployed to utilize with remote devices. An Edgewater SBC allows you to register all devices locally to the Edgemarc which itself then registers back to your...

  • Provisioning Your Phones on a CloudCoPartner Server

    Overview: After you receive your server details you will need to begin the process of setting up your server. One of the first things you will most likely be looking to do, will be setting up your pho...

  • Methods of Connecting Phones to CloudCo PBX

    There are 4 main methods available to get your phones connected to your CloudCo Partner PBX. These include Remote STUN, the 3CX SBC software, an IPSEC VPN, and the Edgewater Edgemarc SBC devices. Each...

  • Managing Hard Drive Space

    Overview: Depending upon how much hard drive space you decided to get with your server, you may need to pay attention to how much of that hard drive space you are using. 3CX utilizes many functions th...

  • Configuring a CloudCo Partner SIP Trunk with 3CX

    3CX allows for fairly simple configuration of SIP trunks within its web interface. CloudCo Partner is one of the supported SIP Trunk providers and thus 3CX has a base template that you will be able to...

  • Best Practices When Deploying Your Server

    Overview: When deploying your server, there are often little things and best practices that we notice are often missed or overlooked when deploying hosted servers. Please take a look at this list befo...

  • Setting up IPSEC Site-to-Site VPN on Cisco Meraki Security Appliance

    First, we need to configure the 3rd party VPN in Meraki. This needs to be done on both Meraki appliances. In the Meraki portal, select the proper network, then navigate to Security Appliance > Site-to...